CLAVE HOZE™ LV


CLAVE HOZE™-LV is a total redesign of our LS series autoclave hose. Like the LS series it is a high temperature, two ply silicone rubber jacket with a stainless steel inner liner and threaded brass fittings. The two ply silicone outer jacket provides a soft, highly flexible vacuum tube with no sharp edges or protrusions that could puncture vacuum bags. The steel inner liner prevents hose collapse under autoclave pressures and resists damage caused by shop handling and use.

Fittings were designed by TMI for use in autoclaves to relieve stress at the ferrule interface, to improve the rubber to fitting seal and to extend service life. Large wrench flat areas for quick and easy attachment to quick connects have also been added on the LV series fittings. The silicone rubber compound is produced using a proprietary manufacturing/extrusion process resulting in a more homogeneous jacket.

ORDER INFORMATION

Part Designation   Description
LV-1   1/4" Male NPT fittings, both ends.


Note: Other fitting sizes available on request (Use -3 suffix to indicate 3/8" Male NPT fittings, i.e.: LV-1-3 etc.).

GENERAL DATA

Autoclave Pressure Rating: 500 PSIG
Inside Diameter: 3/8"
Color: Grey
Length: Up to 50'
Maximum Tested Use Temperature: 450° F.
Maximum Tested Vacuum Flow: 15 SCFM, 10' hose length
Minimum Bend Radius: 6"
Standard Brass Fittings: 1/4" NP

 

Need Help?  Let us help you find the right process and structural materials you need.

 801-265-0111

Download Clave hoze LV