CureTape™ TMF-41661GFR, is a tight weave nylon 6,6 fabric. It is used as a
compaction over-wrap fabric on composite cylinders leaving a clean, fine surface
impression for secondary bonding, painting and abrasion resistance.
This product has a service temperature of 450oF and a melt point of 480oF. Secondary painting, or bonding is recommended without further surface treatment.
PROPERTIES |
SPECIFICATION | TEST METHOD |
FINISH | GFR | PFG |
BREAK STRENGTH | ||
- WARP | 225 lb (Grab, Min) | ASTM-D 1682-64 |
- FILL | 155 lb (Grab, Min) | |
EXTRACTABLE MATERIALS | ||
(Petroleum Ether Method) | 0.5% | ASTM-2257-69 |
FINISHED COUNT | ||
- WARP | 62 ends/in (min) | ASTM-2257-69 |
- FILL | 50 picks/in (min) | |
PH | 4.5-7.0 | FTM-2811 |
Put Up | 2" x 450 yd + 10% non-seamed/Continuous | ASTM-D-3774 |
Thickness | .009" | ASTM-D-1777-64 |
Weight | 3.0 oz/sq yd | ASTM-D-3776 |
Other widths available upon request.
Let us help you find the right process and structural materials you need.