801-265-0111

Laminating Systems for High Temperature Service

 

PT2520

Medium viscosity, unfilled, light amber laminating resin that is designed for the construction of tooling and components that will operate in the intermediate high temperature range. Cured structures are durable and have good heat resistance.
PT2620 Gray filled intermediate high temperature laminating resin for tools and fixtures. Filled to allow lower shrinkage and laminating on vertical and severely contoured surfaces without runoff. Three hardeners for a variety of laminate sizes.
PT2846 Amber unfilled high temperature epoxy laminating resin designed specifically for demanding high performance composite tooling. Good handling and fabric penetration, and very high physical properties.
PT2848 Black, lightly filled high temperature epoxy laminating resin designed specifically for demanding high performance composite tooling. Good handling and fabric penetration, and very high physical properties.
PT2876 An unfilled amber epoxy laminating system designed for the highest service temperature applications. The extended working time of PT2876 A/B allows enough time for vacuum-bagging, yet will set well enough at room temperature to allow the laminate to be demolded from the pattern for post curing. Long tool life is obtainable for autoclave service temperatures up to 450°F., if proper fabrication techniques are use during construction. This system will easily wet-out carbon and fiberglass tooling fabrics. It can also be used for making high-temperature service composite parts.

PT2520
Medium viscosity, unfilled, light amber laminating resin that is designed for the construction of tooling and components that will operate in the intermediate high temperature range. Cured structures are durable with good heat resistance.

PT2620
Gray filled intermediate high temperature laminating resin for tools and fixtures. Filled to allow lower shrinkage and laminating on vertical and severely contoured surfaces without runoff. Three hardeners for a variety of laminate sizes.

PT2846
Amber unfilled high temperature epoxy laminating resin designed specifically for demanding high performance composite tooling. Good handling and fabric penetration, and very high physical properties.

PT2848
Black, lightly filled high temperature epoxy laminating resin for similar uses as with PT2846. Light filler content helpful in controlling drain on vertical surfaces. Excellent cured high temperature properties.