QuickDraw™ Vacuum Bagging Film (PA-6000)

Quick Draw™ PA-6000 is a self-venting, high temperature, clear Nylon 6 vacuum
bagging film specially textured for use in composite laminating and bonding processes.

Patented Quick Draw™ films are textured to provide rapid, controlled evacuation of vacuum bags with little or no air/volatile entrapment. The textured pattern geometry permits air flow under the bag across a smooth surface and with a breather. The minimal surface contact with the rest of the lay up allows easier positioning before vacuum is applied.

Quick Draw™ also improves film drapeability and elongation while reducing shrinkage of the bag during cure. As a result bridging is less pronounced and irregular contours and configurations can be bagged with fewer and smaller pleats or gussets.

Color: Green
Flammability: Self Extinguishing
Forms Available: Sheeting on 3” or 6" core
Gauge control: + 10%
Shelf Life: Indefinite
Thickness: 0.002", 0.003", 0.005"
Width: Up to 140"

Elongation, ASTM D 882: 425%
Maximum Use Temperature: 400°F
Melt Point: Crystalline: 422°F
Fisher Johns: 420°F
Minimum Use Temperature: -80°F
Shrinkage: < 0.5% at 350°F
Tensile Strength, ASTM D 882: 15,000 psi
Yield Strength, ASTM D 882: 4,600 psi

Use caution when used in the presence of M Cresol, Formic Acid, Phenol Bearing Compounds, Potassium, Thiocyanate, 2,2,3,3, Tetrafluoropropane.

Quick Draw™ is a trademark of Film Technology, Inc., U.S. Patent No. 5129813

Note: All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. No warranties of any kind are made except that materials supplied are TMI standard quality. All risk and liability arising from handling, storage and use of TMI products, as well as compliance with applicable legal restriction, rest with the buyer.

Need Help?  Let us help you find the right process and structural materials you need.